This product is no longer promoted on Made-in-China.com. If you find any infringement or sensitive information of it, please contact us for handling. Thank you.

Resistant Acid and Alkaline Ayg Series Chemical Inline Centrifugal Pump

Contact Supplier

Mr. Seth. Chan
M.D What'sApp same No. as phone
Diamond Member Since 2016

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

OEM
Ok
Transport Package
Wooden-Case
Trademark
Tongke
Origin
China
HS Code
8413709990
Production Capacity
2000sets/Year

Product Description

AYG series Chemical Inline Centrifugal Pump for Oil  (API 610 standard) 
    Design and manufacture of this pump conforms to the requirements in API 610 Centrifugal pumps used for petroleum,heavy chemical and natural gas industries (Version 8) and GB3215-82, AYG of which comes as type OH3 pump.Pumps of this series can be used for refineries, petrochemical industry, pipeline booster, cryogenic engineering, coal chemistry etc. to transport various clean, cryogenic and high-temperature combustible, explosive and corrosive media.

Running Data
Capacity3-600  m3/h
Head4-120 m
Liquid Temperature-25~ +250 ºC
Working pressure0~ 2.5 MPa 

√ AYG series Chemical Inline Centrifugal Pump  Characteristics of Structure
    Pumps of this series are single-stage single-suction redially split vertical pipeline centrifugal pumps. The pumpcasing is in redial split and the place between the pump casing and cover is sealed by a limited sealing gasket; the pump casings of an aperture over 80mm is in dual-volute design, for the purpose to reduce the waterpower caused radial force and the pump vibration; a connector for residual liquid drain-out is set on the pump casing. Both suck-in and drain-out flanges of the pump casing are available with connectors for measuring and seal flushing.
    Both inlet and outlet flanges of this pump hold same pressure class and nominal diameter and the vertical axis is presented in a linear layout. The linking type of the inlet and outlet flanges and the executive standard can be varied in accordance with the required size and pressure class of users and either GB, DIN or ANSI can be chosen.
    The pump cover features insulation and cooling function and can be used to transport the medium which has a special requirement on temperature. On the pump cover an exhaust cork is set, used to exhaust both pump and pipeline before the pump is started. The size of the sealing cavity meets with the need of the packing seal or various mechanical seals, both packing seal and mechanical seal cavities are interchangeable and equipped with a seal cooling and flushing system. The layout of the seal pipeline cycling system complies with API 682.

    AYG series Chemical Inline Centrifugal Pump  uses a rolling bearing to bear the pump load, which includes the pump load, the rotor weight and the instantaneous load caused at the pump start. The bearing is set in the incorporated bearing frame and lubricated with grease.
The impeller of this series pump comes as a single-stage single-suction closed impeller and is mounted on the axis with one key and one impeller nut with a steel screwed sleeve, whose self-lock function makes the impeller safely and reliably mounted; all the impellers have been balancing processed and, when the specific value between the maximum outer diameter and the width of the impeller is less than 6, dynamic balance
is needed; the waterpower design of the impeller makes the cavitation property of the pump enhanced to the maximum.
    The axial force of the pump is made balanced by means of the front and back wearable rings and balancing holes of the impeller and the pump can be kept at a higher waterpower efficiency by replacing either the pump s or the impeller's wearable ring. A lower NPSH value will leave a lower pump installation height and a reduced installation cost.
    Viewing from the motor, the pump moves clockwise.


 Drawing and Advantage
Resistant Acid and Alkaline Ayg Series Chemical Inline Centrifugal PumpA bearing frame is set in between
its motor and pump, so it can be used in a place of a higher temperature or in an important case (see the sectional view).
Compared with the horizontal pump, the vertical pipeline pump of the same property features a less land area and a simpler pipeline link, saving the basis investment.

MODEL SLECTION
 the approximate property range
of it can be decided by means of the model spectrum upon the corresponding speed and the final selection needs to think of the pump's NPSH value, efficiency and maximum allowed torque (power of the motor) and use the individual performance curve .
More detailed technical data and operating condition for AYG series Chemical Inline Centrifugal Pump please check with our engineer.

Company Image for Tongke
Resistant Acid and Alkaline Ayg Series Chemical Inline Centrifugal Pump


Production Process
Resistant Acid and Alkaline Ayg Series Chemical Inline Centrifugal Pump

International Certificate
Resistant Acid and Alkaline Ayg Series Chemical Inline Centrifugal Pump

Service
Twenty years design and engineering experience and More than ten years over sea market Experience. Tongke provide most professional and thoughtful Pre-sales and After service.
Technical training                   Equipment evaluation
Installation and debugging     Troubleshoot
Maintenance                           Update and improvement

Commitment to the service
1.One-year warranty. Provide technical support free all-life of the products.
2.Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected.
3.Hot-line of service is available in 24h, responded in 8h.


Your call and mail is welcome at any time
for  our AYG series Chemical Inline Centrifugal Pump 
Contact Mr Seth Chen
Telphone0086-13817768896

Send your message to this supplier

*From:
*To:
avatar Mr. Seth. Chan
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Mr. Seth. Chan
M.D What'sApp same No. as phone
Diamond Member Since 2016

Suppliers with verified business licenses

Manufacturer/Factory
Type of Ownership
Limited Company
Management System Certification
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001