Sea Water, Industrial Pump, Corrosive Water Submerged Vertical Turbine Pump

• Customization: Available
• After-sales Service: Free Technical Support
• Warranty: 1 Year
• Model NO.: VTP
• Max.Head: 110m-150m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Material: Cast Iron
• Structure: Multistage or Single Satge
• Assembly: Liquid Pumps
• Power: Electric
• Start Up: Electric Pump
• Type: Sea Water Pump
• Application: Submersible Pump, Sewage Pump, Oil Transfer Pump, Chemical Pump
• Industry: Industry
• Media: Water
• Performance: Wear Pump
• Theory: Centrifugal Pump
• OEM: Ok
• Certificate: ISO
• Standard: Yes
• UL Listed: Horizontal
• Transport Package: Wooden-Case
• Trademark: Tongke
• Origin: China
• HS Code: 8413709990
• Production Capacity: 2000sets/Year
• Package Size: 1600.00cm * 1650.00cm * 2500.00cm
• Package Gross Weight: 160.000kg

Product Description

Why choose us

Why choose us?

• Specialized production Manufactory for Vertical Turbine Pump
• Focus on technological innovation, Over Industry leading level
• Good experience at Domestic and oversea market
• Carefully paint  for Good appearance
• Years of International service standards, Engineer one-to-one service

VTP series Vertical multistage long shaft turbine water pump
√ Corrosion resistance main part material, SKF bearing, thordon bearings suitable for sea water.
√ Excellent design for high Efficiency save energy for you.
√ Flexible installation method suitable for different site.
√ Stable running, Easy to install and maintain.

Application

Application and purpose
Petrochemical Industry pump
Seawater desalination plant or salt water pump
Municipal engineering
City flood control and drainage
Industry plant
Industrial architecture
Sewage treatment engineering

Product Parameters

Running Data

Capacity	20-5000 m^3/h
Head	3-150 m
Working Temperature	0-60 ºC
Power	1.5-3400KW

Outlined
This kind of  vertical drainage pump is mainly used for pumping no corrosion, temperature less than 60 °C, suspended solids (not including fiber, the grits) less than 150 mg/L content of the sewage or waste water. LPT type vertical drainage pump is in LP type vertical water pumps, and on the basis of the increase and the collar, set the tube oil lubrication is water. Can smoke temperature below 60 °C, send to contain a certain solid grain (such as scrap iron and fine sand, coal, etc.) of sewage or waste water.
Sea water, industrial pump, corrosive water submerged vertical turbine pump

Product Advantage

√ Long Shaft Vertical Turbine Pump  Structure Advantage 
1.The inlet shall be vertical downward and the outlet horizontal above or under the base.
2.The impeller of pump is classified into enclosed type and half-opening type, and three adjustments: non-adjustable, semi adjustable and full adjustable. It is unnecessary to fill the water when the impellers are fully immersed in the pumped liquid.
3.On the basis o Pump, this type is additionally fit with muff armor tubing and the impellers are made of abrasive resistant material, widening the applicability of pump.
4.The connection of impeller shaft, transmission shaft, and motor shaft applies the shaft coupling nuts.
5.It applies water lubricating rubber bearing and packing seal.
6.The motor generally applies standard Y series tri-phase asynchronous motor, or YLB type tri-phase asynchronous motor as requested. When assembling Y type motor, the pump is designed with anti- reverse device, effectively avoiding reverse of pump. 
More detail about our VTP Primary water treatment plant long shaft vertical turbine pump for curve and dimension and data sheet please conatct Tongke.

Note before order
1.The temperature of medium shall not be higher than 60 .
2.The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3.For VTP type pump, the content of suspended substances in the medium shall be less than 150 mg/L;  for VTP type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4 VTP type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two stage pump, lubricant pressure shall not be less than operational pressure.

VTP pump for IRRIGATION project


VTP pump for sea water plant 


VTP pump for Petrochemical Works

Packaging & Shipping

Packing & Shipping
Packaging: Conventional Packaging suitable for by sea or long distance transportation.
Shipping: 20-45 working days after receiving the deposit of the devices

Company information:
Shanghai Tongke flow technology Co., Ltd. is a professional technology and energy-saving products R & D, product the high efficiency pump , vertical turbine pump , self priming pump ,movable pump station , and energy saving service of the national high-tech enterprises. Belong to Tongji University High-Tech Park and there is three industrial bases located in Shanghai, Dalian and Jiangsu.


Quality guarantee
Shanghai Tongke flow technology Co., Ltd. always foucs on the Technology design, The company's gist is different operation and the goal is the high-quality, high-performance products. We strive to become a trustworthy professional automobileseat cushion company. We passed the TUV registed ISO 9001 and products is passed SGS inspection.

Certifications

International Certificate

Services:
1.one year guarantee for whole machine except for wear parts;
2.24 hours technical support by email;
3.calling service;
4.user manual available;
5.reminding for the service life of the wearing parts;
6.installation guide for clients from both China and abroad;
7.maintance and replacement service;
8.whole process training and guidance from our technicians.

Your call and mail is welcome at any time
for our Sea water, industrial pump, corrosive water submerged vertical turbine pump

Contact	Mr Seth Chen
Telephone	0086-13817768896