- Why choose us?
- Specialized production Manufactory for Vertical Turbine Pump
- Focus on technological innovation, Over Industry leading level
- Good experience at Domestic and oversea market
- Carefully paint for Good appearance
- Years of International service standards, Engineer one-to-one service
Vertical Turbine pump is developed by TONGKE with wide capacity range and high quality, with appropriate fittings for providing water supply to fire protection systems in buildings, plants, yards, chemical area, offer shore platforms etc.
Specifications
| Capacity |
300 to 2,500 GPM (68 to 567 m3/hr) |
| Head |
90 to 650 feet (26 to 198 meters) |
| Pressure |
Up to 650 psi (45 kg/cm2, 4,483 KPa) |
| House Power |
Up to 800 hp (597 kW) |
| Divers |
Vertical electric motors and diesel engines with right angle gears. |
| Liquid type |
Water or sea water |
| Temperature |
Ambient within the limits for satisfactory equipment operation. |
| Material of Construction |
Cast iron, Stainless steel, bronze fitted as standard. |
Fire pumps are installed on fire engines, fixed fire extinguishing systems or other fire fighting facilities. They are used as special pumps for transporting liquid or fire extinguishing agents such as water or foam solutions.
This kind of vertical drainage pump is mainly used for pumping no corrosion, temperature less than 60 °C, suspended solids (not including fiber, the grits) less than 150 mg/L content of the sewage or waste water. LPT type vertical drainage pump is in LP type vertical water pumps, and on the basis of the increase and the collar, set the tube oil lubrication is water. Can smoke temperature below 60 °C, send to contain a certain solid grain (such as scrap iron and fine sand, coal, etc.) of sewage or waste water.
VTP series Long Shaft Electric Vertical Turbine Water pump
√ Corrosion resistance main part material, SKKF bearing, thordon bearings suitable for sea water.
√ Excellent design for high Efficiency save energy for you.
√ Flexible installation method suitable for different site.
√ Stable running, Easy to install and maintain.
1 . Motor less fire pump
Relying on the impeller rotation, the energy is transferred to the liquid without power source fire pump.
2. Vehicle fire pump
An unpowered fire pump mounted on the chassis of a fire engine.
3. Marine fire pump
Non-power fire pump installed in ship, offshore platform and working environment on water.
4. Engineering-oriented fire pump
Fire pumps for fire hydrant systems, water sprinkler systems, foam extinguishing systems, etc.
5. Normal pressure fire pump
Fire pump with rated pressure less than 1.6 MPa.
6.Middle pressure fire pump
Fire pump with rated pressure ranging from 1.8 MPa to 3.0 MPa.
1.The inlet shall be vertical downward and the outlet horizontal above or under the base.
2.The impeller of pump is classified into enclosed type and half-opening type, and three adjustments: non-adjustable, semi adjustable and full adjustable. It is unnecessary to fill the water when the impellers are fully immersed in the pumped liquid.
3.On the basis o Pump, this type is additionally fit with muff armor tubing and the impellers are made of abrasive resistant material, widening the applicability of pump.
4.The connection of impeller shaft, transmission shaft, and motor shaft applies the shaft coupling nuts.
5.It applies water lubricating rubber bearing and packing seal.
6.The motor generally applies standard Y series tri-phase asynchronous motor, or YLB type tri-phase asynchronous motor as requested. When assembling Y type motor, the pump is designed with anti- reverse device, effectively avoiding reverse of pump.
More detail about our VTP series Long Shaft Vertical Turbine Pump for curve and dimension and data sheet please conatct Tongke.
VERTICAL TURBINE PUMP SYSTEM
To meet the recommendations of the standards of the National Fire Protection Association as published in their Pamphlet 20,
current edition, certain accessories are required for all fire pump installations. They will vary, however, to fit the needs of each
individual installation and the requirements of the local insurance authorities. Tongke Pump provides a wide range of fire pump
fittings which include: concentric discharge increaser, casing relief valve, eccentric suction reducer, increasing discharge tee,
overflow cone, hose valve head, hose valves, hose valve caps and chains, suction and discharge gauges, relief valve, automatic
air release valve, flow meter, and ball drip valve. No matter what the requirements, Sterling has a complete line of accessories
available and can satisfy the requirements of each installation.
The charts reproduced below graphically illustrate the many accessories as well as the optional drives that are available with
all Tongke fire pumps and packaged systems.
Similar Product Recommendation
Packing & Shipping
Packaging: Conventional Packaging suitable for by sea or long distance transportation.
Shipping: 20-45 working days after receiving the deposit of the devices
Company information:
Shanghai Tongke flow technology Co., Ltd. is a professional technology and energy-saving products R & D, product the high efficiency pump , vertical turbine pump , self priming pump ,movable pump station , and energy saving service of the national high-tech enterprises. Belong to Tongji University High-Tech Park and there is three industrial bases located in Shanghai, Dalian and Jiangsu.
Quality guarantee
Shanghai Tongke flow technology Co., Ltd. always foucs on the Technology design, The company's gist is different operation and the goal is the high-quality, high-performance products. We strive to become a trustworthy professional automobileseat cushion company. We passed the TUV registed ISO 9001 and products is passed SGS inspection.
Services:
Vertical split casing centrifugal pump with motor for fire fighting
1.one year guarantee for whole machine except for wear parts;
2.24 hours technical support by email;
3.calling service;
4.user manual available;
5.reminding for the service life of the wearing parts;
6.installation guide for clients from both China and abroad;
7.maintance and replacement service;
8.whole process training and guidance from our technicians.
Your call and mail is welcome at any time
Audited Supplier 
){kind=link}