Multisatge High Pressure Centrifugal Pump for Water Supply & Drainage for Mines

• Customization: Available
• After-sales Service: Free Technical Support
• Warranty: 1 Year
• Model NO.: MS
• Max.Head: >150m
• Max.Capacity: 100-200 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Coal Mine
• Advantage: High-Efficiency, Energy-Saving
• OEM: Available
• UL Listed: Yes
• Inlet and Outlet: Horizontal
• Transport Package: Wooden-Case
• Specification: DN50-300
• Trademark: Tongke
• Origin: China
• HS Code: 8413709990
• Production Capacity: 2000sets/Year
• Package Size: 1700.00cm * 1600.00cm * 2200.00cm
• Package Gross Weight: 125.000kg

Product Description

Product Description

 MS type  water pump is used to transport the clear water and the neutral liquid of pit water with solid grain≤ 1.5%. Granularity<0.5mm. The temperature of the liquid is not over 80º C. The temperature of the liquid is not over 80º C. The pumps are suitable for water supply and drainage in mines, factories and cities.
Note: When the situation is in the coal mine, explosion proof type motor shall be used.

 

Product Parameters

OPERATION PARAMETER

Diameter	DN 80-250 mm
Capacity	25-500 m^3/h
Head	60-1798m
Liquid Temperature	up to80 ºC

 
STRUCTRUAL ( ONE TYPE, OTHER TYPES PLEASE CONTACT TKFLO )

This drawings is for Supported with the rolling bearing
other type supported with sliding bearing please contact with Tongke for more details.

1	Cluth part	2	shaft	3	Bearing part	4	packing gland
5	Inlet suction	6	Seal-ring	7	Middle-section	8	Impeller
9	Guide vance	10	Guide vane sleeve	11	water-sealing pipe part	12	Oult section
13	Balancing sleeve	14	Balancing disk	15	packing content	16	Bearing

Model MS pump consists of four parts, stator, rotor, bearing and shaft seal

1.Stator consists of inlet, middle and outlet sections and the guide vane etc., with the take-up bolt tightly clamping all sections to form a working room. The inlet of it stands horizontally while the outlet vertically upward.

2.Rotor consists of the shaft, impeller, balancing disk and muff etc., the shaft passes the power to the impeller to have it work; the balancing disk balances the axial force; and replaceable muff is mounted on both sides of the shaft to protect it.

3.There are rolling and sliding bearings: The rolling bearing consists of bearing seat, bearing and bearing gland and uses grease for lubrication.
The sliding bearing consists of bearing body and cover, liner, dust-proof disk, oil leveller, oil throwing ring etc., and uses thinned oil for lubrication.

4. The shaft is sealed with stuffing and the shaft seal consists of the sealing contents, stuffing, baffle. The liquid in the sealing work-room functions water-sealing, watercooling and water lubricating and the water for watersealing comes from the pressure water inside of the pump.
 

Detailed Photos

Application

 

∧ Water supply & drainage for mines

∧ high buildings life water supply, fire fighting system, automatic spraying water under the water curtain, long distance water transportation, water circulation in production process, supporting the use of all kinds of equipment and various production process water, etc

∧ hotels, restaurants, entertainment refrigeration and air conditioning supply water

Company Profile