MVS series axial-flow pumps AVS series mixed-flow pumps are modern productions successfully designed by the means of adopting foreign modern technology. The new pumps' capacity are 20% larger than the old ones. The efficiency is 3~5% higher than the old ones.
This series pump with adjustable impellers has the advantages of large capacity,broad head, high efficiency, wide application and so on.
A:pump station is small in scale, the construction is simple and the investment is greatly decreased, This can save 30%~ 40% for the building cost.
B: It is easy to install maintain and repair this kind of pump.
C: low noise long life.
What performance does it have?
| Diameter |
DN350-1400 mm |
| Capacity |
900-12500 m3/h |
| Head |
up to 20m |
| Liquid Temperature |
up to 50 ºC |
Where to use it?
1, Industry & agriculture
2, Water supply for cities
3, Mild sewage drainage
4, Water transfer project
What accessories can we choose?
1, Sewage grid
2, Flag valve
3, Pre-burried pipe
4, Water level switch
5, Control panel
How can we install it?
1, Elbow cantilever installation
2, Well cantilever installation
3, Concrete well cantilever installation
What feature does it have?
Installation of Suction and Discharge Pipes
1.Suction Pipe: according to the outline drawing in the booklet. The smallest depth of the pump under the water should be bigger than the datum in the drawing.
2.Discharge:flap valve and other methods.
3.Installation: MVS series are suitable for elbow cantilever installation, well cantilever installation and concrete well cantilever installation.
Motor
Submersible Motor(MVS series) Power class: electric performance meets GB755
Protection class:IP68
Cooling system:ICWO8A41
Basic installation type: IM3013
Voltage: up to 355kw, 380V 600V 355KW, 380V 600V ,6kv, 10kv
Insulation class: F
Rated power: 50Hz
Length of cable: 10m
Shaft Seal
This type has two or three mechanical seals. The first seal, which contacts water, is usually made of carbon silicon and carbon silicon. The second and third are usually made of graphite and carbon silicon.
Leakage Protection
MVS AVS series has leakage protection sensor. When the oil house of motor or the wire-box is leaking, sensor will give out warning or stop working and maintain the signal.
Overheat Protector
The winding of MVS series submersible motor has overheat protector. When it is overheated, warning will be given out or the motor will stop working.
Rotating Direction
Looking from upper side, the impeller is rotating clockwise.
Shanghai Tongke Flow Technology Co.
Ltd is one of the sub-company of Shanghai Tongji Nanhui Science Hi-tech part Co., Ltd. A manufacturer of a full range of industry products and power supply products ,including the blower , pumps ,electric motor and control system since 2001. Since our founding we have dedicated our activities towards the manufacture of products that provide efficient utilizations for ways to conserve the resources needed to sustain life.
- Now exporting to more than 50 countries across the face of the globe, we of the Tongji Nanhui Group under the Tongke brand have continued to hold fast to our principle of continual self-development.Determined to increase our competitive strengths on domestic and foreign markets, in 2010 the group of the company put its Shanghai Jiangsu and Dalian factory into full capacity service. The factory has been built on 25,000m2 of land with production facilities covering an area of 15,000m2 .
- Through the years, we has been propelled into a leadership techniques the Group has developed, our machinery, R&D unit, professional staff, and our continual provision of top quality and modern services.
- Our basic philosophy is to ensure that all of our actions are conducted in strict conformance with legal and business ethics, that our customers are informed and their rights always protected, that we provide the best possible quality of services and technology, and that we establish a system of human resources that meets the satisfaction of both our own personnel and our customers.
- Backed by 10 years of developed technology and high quality of service, we stride forward into the future determined never to make any concessions in anything we do.Under the Tongke brand company we have been dedicated to offering our services to those industries that value and need high performance.
Factory Work Shop
The factory has been bult on 25.000m2of land with production facilities covering an area of 15,000m2.We design and make thebig size pump according the details inquiryfrom the end user . TKFLO have the independent product development,product design abilitlythe company has 5 production lines, covering a numberof products. Not only for its own independent registered trademarK TKFLO,TONGKE FLOW, but also for customers to provide OEMservice, Design service.
Quality Control
After years of development,the company has passed the B.V certification of IS 9001-2015,ISO 14001-2015 ,EMC certifcated CEetc international management system.
NFPA fire protection association member factory ,UL listed for double suction pump, intellectual property patent certificate forproducts and fully implementing the 6S management.
Application/Feedback
Why Choose Us?
Our advantage
- Focus on Customs requests & service
We provide premium services to meet customer demand, Customer satisfaction is an important factor to measure the quality of products.Energy efficient, Stable operation and Forever technique service.
- High Qualified Technical Engineer Team
Hold an interdisciplinary professionals and practical experience of technical team ,including two doctoral tutor , one professor,5 senior engineers and more than 20 engineers for long techno-logical improvement and innovation and to provide you with a full range of technical support and good after-sale service.
- High quality standard parts supplier
Quality suppliers for high quality castings; Famous international and domestic Brand mechanical elements, bearing, motor, control panel and diesel engines to meet the diverse needs of our customers. Collaborated with WEG/ABB/SIMENS/ CUMMININS/ VOLVO/ PERKIN...
- Strictly Quality Control System
Manufacturer strictly follows ISO9001:2015 quality control system and 6S management system. You may be sure that our products meet the required quality tenders. Material report, Performance test report... and Third party inspection are available.
Our Service
- Inquiry and consulting support. 15 years pump technical experience.- One-to-one sales engineer technical service.- Hot-line of service is available in 24h, responded in 8h.
- Technical training Equipment evaluation; - Installation and debugging Troubleshoot; - Maintenance Update and improvement;- One-year warranty. Provide technical support free all-life of the products. - Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected.
Audited Supplier 
){kind=link}
){kind=link}