Providing Pumping Solutions TONGKE Can Fulfill Your Requirements:
- Complete in-house fabrication capabilities
- Mechanical-run test capabilities with customer furnished equipment for all NFPA standards
- Horizontal models for capacities to 2,500 gpm
- Vertical models for capacities to 5,000 gpm
- In-line models for capacities to 1,500 gpm
- End suction models for capacities to 1,500 gpm
- Drives: electric motor or diesel engine
- Basic units and packaged systems.
Product Description
Products Description
Precision balancing of all factors in the design of ASN horizontal split case fire pump provide mechanical dependability, efficient operation and minimal maintenance. Simplicity of design ensures long efficient unit life, reduced maintenance costs and minimum power consumption.Split case fire pumps are specifically designed and tested for fire service application around the world including: Office buildings, hospitals, airports, manufacturing facilities, warehouses, power stations, oil and gas industry, schools.
GPM 300-2500 ASN series NFPA20/UL listed double suction split case centrifugal fire fighting pump
Split case centrifugal fire fighting pump with electric motor
Split case centrifugal fire fighting pump with diesel engine
With NFPA 20 jockey pump and control system
Systems
TONGKE Fire Pump installations (UL approved ,Follow NFPA 20 and CCCF ) deliver superior fire protection to facilities worldwide. TONGKE Pump has been offering complete service, from engineering assistance to in house fabrication to field start-up. Products are designed from a broad selection of pumps, drives, controls, base plates and accessories. Pump choices include horizontal, in-line and end suction centrifugal fire pumps as well as vertical turbine pumps.
Both horizontal and vertical models provide capabilities up to 5,000 gpm. End suction models deliver capacities to 2,000 gpm. In-line units can produce 1,500 gpm. Head ranges from 100 ft to 1,600 ft with as much as 500 meters. Pumps are powered with electric motors, diesel engines or steam turbines. Standard fire pumps are Ductile cast iron with bronze fittings. TONGKE supply the fittings and accessories recommended by the NFPA 20.
Application
Applications vary from small, basic electric motor driven to diesel engine driven, packaged systems. Standard units are designed to handle fresh water, but special materials are available for sea water and special liquid applications.
The TONGKE Fire Pumps give superior performance in Agriculture, General Industry, Building Trade, Power Industry, Fire Protection, Municipal, and Process applications.
Features
State of the art engineered systems arrive ready to install. Pump, driver and controller are mounted on a common base.All engineered systems have complete, interconnected wiring. Preconstruction eliminates costly, complex installation problems. In-house fabrication gives TONGKE Pump the ability to customize a system and assume complete unit responsibility, which means the customer has only one supplier to contact if there are questions. All pump package system meet the requirements of UL LIST, NFPA20, and CCCF. TONGKE Pump extensive distribution system provides worldwide technical and commercial support with qualified personnel in most major Asia and international .
ASN split case fire fighting pump
Horizontal split casing centrifugal pumps complies with NFPA 20 and UL listed application requirements and with appropriate fittings for providing water supply to fire protection systems in buildings, factories plants and yards.
Parameters
| Capacity |
300 to 2500GPM(68 TO 567 M3/HR |
| Head |
90 TO 650 FEET(26 TO 198 meters) |
| Pressure |
Up to 650 psi(45 kg/cm 2,4483 kps) |
| House Power |
Up hp 800 hp (597 kw) |
| Divers |
Horizontal electric motors, diesel engines |
| Liquid type |
Water or sea water |
| Temperature |
Ambient within the limits for satisfactory equipment operation |
| Material of construction |
Cast iron, Stainless steel, Ni-Al Bronze, Duplex stainless steel |
Horizontal Split Casing Centrifugal Fire Pump Section View/Detail
Performance Range of Horizontal Split Case Pump
UL listed fire fighting pumps date can be choosed
Pump Model
(split casing pump) |
Rated Capacity
(GPM) |
Inlet×Outlet
(INCH) |
Rated Net Pressure Range (PSI) |
Approx Speed
(RPM) |
Max working Pressure (PSI) |
| 80-350 |
300 |
5×3 |
129-221 |
2950 |
290.00 |
| 80-350 |
400 |
5×3 |
127-219 |
2950 |
290.00 |
| 100-400 |
500 |
6×4 |
225-288 |
2950 |
350.00 |
| 80-280(I) |
500 |
5×3 |
86-153 |
2950 |
200.00 |
| 100-320 |
500 |
6×4 |
115-202 |
2950 |
230.00 |
| 100-400 |
750 |
6×4 |
221-283 |
2950 |
350.00 |
| 100-320 |
750 |
6×4 |
111-197 |
2950 |
230.00 |
| 125-380 |
750 |
8×5 |
52-75 |
1480 |
200.00 |
| 125-480 |
1000 |
8×5 |
64-84 |
1480 |
200.00 |
| 125-300 |
1000 |
8×5 |
98-144 |
2950 |
200.00 |
| 125-380 |
1000 |
8×5 |
46.5-72.5 |
1480 |
200.00 |
| 150-570 |
1000 |
8×6 |
124-153 |
1480 |
290.00 |
| 125-480 |
1250 |
8×5 |
61-79 |
1480 |
200.00 |
| 150-350 |
1250 |
8×6 |
45-65 |
1480 |
200.00 |
| 125-300 |
1250 |
8×5 |
94-141 |
2950 |
200.00 |
| 150-570 |
1250 |
8×6 |
121-149 |
1480 |
290.00 |
| 150-350 |
1500 |
8×6 |
39-63 |
1480 |
200.00 |
| 125-300 |
1500 |
8×5 |
84-138 |
2950 |
200.00 |
| 200-530 |
1500 |
10×8 |
98-167 |
1480 |
290.00 |
| 250-470 |
2000 |
14×10 |
47-81 |
1480 |
290.00 |
| 200-530 |
2000 |
10×8 |
94-140 |
1480 |
290.00 |
| 250-610 |
2000 |
14×10 |
98-155 |
1480 |
290.00 |
| 250-610 |
2500 |
14×10 |
92-148 |
1480 |
290.00 |
UL listed NFPA 20 Split casing centrifugal fire fighting pump with electric motor
Horizontal multistage centrifugal fire pumps with appropriate fittings for providing water supply to fire protection systems in buildings, plants and yards.
NFPA 20 Diesel engine drive Split casing double suction centrifugal fire water pump set
Horizontal end suction centrifugal fire pumps with appropriate fittings for providing water supply to fire protection systems in buildings, plants and yards.
Multistage Centrifugal High Pressure Stainless Steel Jockey Pump Fire Water Pump
A jockey pump is a pump connected to a fire sprinkler system and is intended to maintain pressure in a fire protection piping system to an artificially high level so that the operation of a single fire sprinkler will cause a pressure drop which will be sensed by the fire pump automatic controller, causing the fire pump to start. The jockey pump is essentially a portion of the fire pump's control system.
Parameters
| Outlet Diameter |
25-150 mm |
| Capacity |
18-360 m3/h |
| Pressure |
0.3-2.5MPa |
| Medium temperature |
-10 ~ 80°C |
| Material |
Casing/impeller: cast iron, stainless steel, copper, bronze, Shaft: carbon steel 45#,stainless steel |
| Seal |
Bergmann mechanical seal |
| Bearing |
S*KF/NTN/NSK |
| Motor |
High quality motor or UL motor |
Fire Protection
You have decided to reduce the risk of fire damage to your facility by installing a UL, ULC listed fire pump system. Your next decision is which system to purchase.
You want a fire pump that is proven in installations worldwide. Manufactured by an professional with vast experience in the fire protection field. You want complete service to field start-up. You want a TONGKE Pump.
Fire Pump Units & Packaged Systems
Electric Motor Drive and Diesel Engine Drive fire pumps can be furnished for any combination of pumps, drives, controls and accessories for listed and approved and NON Listed fire service applications. Packaged units and systems lower fire pump installation costs and offer these.
Accessories
To meet the recommendations of the standards of the National Fire Protection Association as published in their Pamphlet 20, current edition, certain accessories are required for all fire pump installations. They will vary, however, to fit the needs of each individual installation and the requirements of the local insurance authorities. Tongke Pump provides a wide range of fire pump fittings which include: concentric discharge increaser, casing relief valve, eccentric suction reducer, increasing discharge tee, overflow cone, hose valve head, hose valves, hose valve caps and chains, suction and discharge gauges, relief valve, automatic air release valve, flow
meter, and ball drip valve. No matter what the requirements, Sterling has a complete line of accessories available and can satisfy the requirements of each installation.
The charts reproduced below graphically illustrate the many accessories as well as the optional drives that are available with all Tongke fire pumps and packaged systems.
UL listed fire fighting pumps Structural Features & Performance Advantages
√ Profession al design software and development system, and advanced CFD three-mode analysis;
√ Compact structure, streamline appearance, good stability and ease of installation;
√ Steady operation, great cavitations resistance performance and high efficiency;
√ Domestically-pioneering sleeve-less patented technology ensures the pump's reliability, and maximizes the ease of maintenance and care for users.
Why choose us?
• Specialized production Manufactory for fire Pump
• Focus on technological innovation, Over Industry leading level
• Good experience at Domestic and oversea market
• Carefully paint for Good appearance
• Years of International service standards, Engineer one-to-one service
• Make to order, According to site requirements and working condition of the production
More details about our UL listed fire fighting pumps please contact Tongke.
https://tkflow.en.made-in-china.com/contact-info.html
Packaging & Shipping
Packing & Shipping
Packaging: Conventional Packaging suitable for by sea or long distance transportation.
Shipping: 20-45 working days after receiving the deposit of the devices
Company Profile
Centered around technological innovation and pursuing superior quality
To be a world-class provider of fluid transfer solutions
Shanghai Tongke Flow Technology Co., Ltd is a technology-based enterprise integrating technological innovation and environmental protection concepts. Since its establishment in 2001, it has always been committed to the cutting-edge research and development and production of fluid conveying products and intelligent fluid equipment, and has been deeply engaged in the field of enterprise energy-saving transformation services. Adhering to the original intention of green development, the company continues to promote the energy-saving and environmental protection upgrading of cutting-edge technology products, and continues to lead the industry innovation trend.
Tongke Flow Technology, as the supplier of a full range of Fluid equipment solutions in the industry, is not only specialized in manufacturing comprehensive fluid equipment products including pumps, motors and efficient control systems, but also adept in customizing high-quality and feasible technical solutions according to client needs to help the efficient operation of enterprise projects and achieve a win-win situation of economic and environmental benefits.
High Qualified Technical Engineer Team
The company has strong technical support, and has created an interdisciplinary and high-quality technical team relying on the rich resources of Shanghai Tongji Nanhui Science and Technology Park, including doctoral supervisors, professors, senior engineers and many senior engineers. They provide inexhaustible driving force for the company's technological innovation and product upgrades by virtue of their profound professional knowledge and rich practical experience.
Excellent manufacturing capabilities
In terms of production, Tongke Flow Technology shows excellent manufacturing capabilities. Since 2010, the company has established modern production bases in Shanghai, Jiangsu, Dalian and other places, with a total area of 25,000 square meters, production facilities area of more than 15,000 square meters, equipped with 5 efficient production lines, fully covering the pump, motor, control system and other full range of fluid equipment products, to ensure high quality and high efficiency products.
Product Manufacture
Tongke Flow Technology, excellence in manufacturing. We strive for perfection in every aspect of production and offer comprehensive testing and inspection services to ensure product quality. Customer satisfaction is the gold standard by which we measure our product quality and is the driving force behind our continuous improvement.
Focus on customer needs and service
In terms of service, Tongke Flow Technology covers major cities all over the county with its business network, and its clients are involved in many fields. The company has successfully carried out technological transformation for nearly 20 large state-owned enterprises and joint-stock enterprises in the Yangtze River Delta, Pearl River Delta, Central China and North China. Our solutions have not only brought significant economic benefits, but also won widespread social praise, especially in the chemical, chemical fiber, steel, fertilizer, pharmaceutical, thermal and other industries.
ENTERPRISE QUALIFICATION
Since its inception, our company has steadfastly adhered to the core purpose of "focusing on technological innovation, striving for quality enhancement, and committing to providing professional services to solve customer issues." We have continually refined our skills and strengthened our brand image. Over the years, we have not only received numerous authoritative certifications and accolades but have also successfully passed the stringent certifications of ISO 9001-2015 International Quality Management System, ISO 14001 Environmental Management System, and ISO 45001. Occupational Health and Safety Management System. We consistently adhere to international standards, ensuring the stability and reliability of our product and service quality, winning widespread acclaim and trust in the market.
Audited Supplier 
){kind=link}