Double Suction Split Casing Centrifugal Fire Fighting Water Pump

• After-sales Service: Free Technical Support
• Warranty: 1 Year
• Max.Head: 650feet
• Max.Capacity: 5000gpm
• Driving Type: Motor/Diesel
• Impeller Number: Single-Stage Pump
• Model NO.: XBC-ANS
• Working Pressure: Middle Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Based on Model
• Impeller: Semi-Open
• Usage: Fire Fighting
• Material: Cast Iron,Stainless Steel, Carbon Steel etc
• Structure: Double Suction
• Standard: Follow Nfpa 20 and Cccf
• Transport Package: Wooden Case
• Specification: based on model
• Trademark: TONGKE
• Origin: China
• HS Code: 8413709990
• Production Capacity: 3000sets/Year

Product Description

Double suction split casing centrifugal fire fighting water pump 
Horizontal Split Case (ANS) pumps are given their name due to the "split" design of the casing, where the casing cover can be lifted off of the pump to expose the internal components. These components include the impeller, bearings, pump shaft, and so on. ANS pumps have two bearings, located on either side of the impeller, which are useful to withstand the large amount of vibration and thrust forces often caused by water turbulence in the suction piping. The pump casings are often designed to handle higher working pressures, and are often heavier. The durability of the ANS design allows the pump to be used for very large water flows - often in excess of 5000 GPM. It should be noted that an ANS pump is not always mounted horizontally, it is possible to have the same durability design features and have the pump designed to be mounted vertically.

Advantages
1,Single stage, medium pressure double inlet centrifugal pump with two flanged bearing frame, suitable for flexible coupling to electric motor or internal combustion engine as a driver
2,Ample dimensioned shaft guided through roller bearings and hardened shaft sleeve
3, Fully-enclosed single piece casting, double inlet impeller practically doesn't produce any axial trust
4, High operating reliability due to maintenance and service parts
5, Spiral housing axially spitted means easy maintenance without pipe disconnection

 

Performance Data

Capacity	300 to 5000GPM (68 to 567m3/hr)
Head	90 to 650 feet (26 to 198 meters)
Pressure	Up to 650 feet (45 kg/cm2, 4485 KPa)
House Power	Up to 800HP (597 KW)
Drivers	Vertical electrical motors and diesel engines with right angle gears, and steam turbines.
Liquid type	Water or sea water
Temperature	Ambient within the limits for satisfactory equipment operation.
Material of Construction	Cast iron, Bronze fitted as standard. Optional materials available for sea water applications.

Scope of supply :
Diesel Engine drive fire pump+ control panel+ Jockey pump             
Electrical motor drive pump +  control panel+ Jockey pump

 

Application 


Standard units are designed to handle fresh water, but special materials are available for sea water and special liquid applications in mines, factories and cities.

The TONGKE Fire Pumps give superior performance in applications in mines, factories and cities Agriculture, General Industry, Building Trade, Power Industry, Fire Protec

 

Engine

Electric Motor Driven
Aluminum and cast iron frame motors of IEC standard (FR56-355), and NEMA standard (FR48-449), all products meet the IE1, IE2, IE3, NEMA Epact and premium efficiency requirements

Diesel Driven
COMMINS made in China with IWS,  Deutz, Perkinks, or other China high quality Brand according to clients' demands.
 

TONGKE Fire Pump installations (Follow NFPA 20 and CCCF ) deliver superior fire protection to facilities worldwide. TONGKE Pump has been offering complete service, from engineering assistance to in house fabrication to field start-up. Products are designed from a broad selection of pumps, drives, controls, base plates and accessories. Pump choices include horizontal, in-line and end suction centrifugal fire pumps as well as vertical turbine pumps.

Providing Pumping Solutions TONGKE Can Fulfill Your Requirements:
 √ Complete in-house fabrication capabilities
 √ Mechanical-run test capabilities with customer furnished equipment for all NFPA standards
 √ Horizontal models for capacities to 2,500 gpm
 √ Vertical models for capacities to 5,000 gpm
 √ In-line models for capacities to 1,500 gpm
 √ End suction models for capacities to 1,500 gpm
 √ Drives: electric motor or diesel engine
 √ Basic units and packaged systems.