MS series Horizontal Multistage Heavy duty High reliability pump for mine
High-efficiency for Energy-saving √
Wide performance range √
Operating safety&steady √
Low noise √
Long life √
Convinent installation. √
MD type wearable centrifugal mine water pump is used to transport the clear water and the neutral liquid of pit water with solid grain≤ 1.5%. Granularity<0.5mm. The temperature of the liquid is not over 80º C. The temperature of the liquid is not over 80º C. The pumps are suitable for water supply and drainage in mines, factories and cities.
Note: When the situation is in the coal mine, explosion proof type motor shall be used.
Product Parameters
Operation Parameter
| Diameter |
DN 85-250 mm |
| Capacity |
25-500 m3/h |
| Head |
60-1798m |
| Liquid Temperature |
up to80 ºC |
Application
Application Fields
∧ Water supply & drainage for mines
∧ high buildings life water supply, fire fighting system, automatic spraying water under the water curtain, long distance water transportation, water circulation in production process, supporting the use of all kinds of equipment and various production process water, etc
∧ hotels, restaurants, entertainment refrigeration and air conditioning supply water
√ Structrual for MS series Horizontal Multistage Heavy duty High reliability pump for mine
This drawings is for Supported with the rolling bearing
other type supported with sliding bearing please contact with Tongke for more details.
| 1 |
Cluth part |
2 |
shaft |
3 |
Bearing part |
4 |
packing gland |
| 5 |
Inlet suction |
6 |
Seal-ring |
7 |
Middle-section |
8 |
Impeller |
| 9 |
Guide vance |
10 |
Guide vane sleeve |
11 |
water-sealing pipe part |
12 |
Oult section |
| 13 |
Balancing sleeve |
14 |
Balancing disk |
15 |
packing content |
16 |
Bearing |
Model MS pump consists of four parts, stator, rotor, bearing and shaft seal
1.Stator consists of inlet, middle and outlet sections and the guide vane etc., with the take-up bolt tightly clamping all sections to form a working room. The inlet of it stands horizontally while the outlet vertically upward.
2.Rotor consists of the shaft, impeller, balancing disk and muff etc., the shaft passes the power to the impeller to have it work; the balancing disk balances the axial force; and replaceable muff is mounted on both sides of the shaft to protect it.
3.There are rolling and sliding bearings: The rolling bearing consists of bearing seat, bearing and bearing gland and uses grease for lubrication.
The sliding bearing consists of bearing body and cover, liner, dust-proof disk, oil leveller, oil throwing ring etc., and uses thinned oil for lubrication.
4. The shaft is sealed with stuffing and the shaft seal consists of the sealing contents, stuffing, baffle. The liquid in the sealing work-room functions water-sealing, watercooling and water lubricating and the water for watersealing comes from the pressure water inside of the pump.
Certifications
Quality certificate
Company Image
Service
Twenty years design and engineering experience and More than ten years over sea market Experience. Tongke provide most professional and thoughtful Pre-sales and After service.
Technical training Equipment evaluation
Installation and debugging Troubleshoot
Maintenance Update and improvement
Commitment to the service
1.One-year warranty. Provide technical support free all-life of the products.
2.Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected.
3.Hot-line of service is available in 24h, responded in 8h.
Your call and mail is welcome at any time
){kind=link}